Msi KT3 Ultra2 driver 5.7 is a BIOS and System Update driver from MSI. It runs on following
operating system: Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008. We recommend always using the most recent driver version available, so check for Msi KT3 Ultra2 driver new verison
on our site as often as possible.
Do not forget to set a system restore point before installing Msi KT3 Ultra2 driver 5.7 driver, to avoid problems that may occurs when you install a
wrong driver, or for other OS version etc. If a problem occur than you may restore you computer to previous time, before installing the driver.
Publisher review: -Support AMD Barton XP3000 (FSB333) CPU (For KT3 Ultra2 Only)-Add "CPU Halt Command Detection" item in the BIOS Setup-Fixed ATI 8500 AGP card cannot be usedThis BIOS is intended for MS-6380E PCB with KT266A & KT333 chipset. K7T266 Pro2 & K7T266 Pro2-RU don't use the same BIOSSpecifications:CPU· Supports Socket A (Socket 462) for AMD Athlon XP/Athlon/Duron processor· Supports 800MHz up to Athlon XP 2700 ) processorChipset· VIA KT333 Chipset - FSB @200/266/333 MHz - AGP 4X and PCI Advanced high performance memory controller· VIA VT8235 Chipset - Integrated Direct Sound AC'97 audio - Dual channel Ultra DMA 33/66/100/133 master mode EIDE controller - ACPI - Integrated USB 2.0 controllerFSB· 100/133/166 MHz clocks are supported.Main Memory· Supports six memory banks using three 184-pin DDR DIMMs· Supports a maximum memory size up to 3GB· Supports 2.5V DDR200/266/333 DDR SDRAM DIMM· NO support ECC FunctionSlots· One AGP slot - AGP (Accelerated Graphics Port) specification compliant - Supports AGP 2.0 1x/2x/4x· Five 32-bit PCI bus slots (support 3.3v/5v PCI bus interface)· One CNR (Communication Network Riser) slotOn-Board IDE· An IDE controller on the VT8235 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66/33 operation modes.· Can connect up to four IDE devices.Audio· Realtek ALC650 6-channel audio - SPDIF out (through S-Bracket only)Promise 20276 On-Board - Supports ATA133 RAID 0 or 1 - The two ATA133 RAID connectors support hard disk drives only Note: Only two hard disk drives will adopt the RAID function.Bluetooth - 1 bluetooth connector on-board for bluetooth module connectionOn-Board Peripherals· On-Board Peripherals include: - 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes - 2 serial ports (COM A COM B) - 1 parallel port supports SPP/EPP/ECP mode - 1 IrDA connector for SIR/ASKIR/HPSIR - 1 audio/game port - 1 D-Bracket™ pinheader - 1 S-Bracket pinheaderBIOS· The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.· The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications.Dimension· 30.4 cm(L) x 23.5 cm(W) ATX Form FactorMounting· 6 mounting holes.Special Functions· USB Interface - Supports USB 2.0 and downward compatible with USB 1.1 - 6 ports USB 2.0 (Rear x 2 / Front x 4)
Operating system:Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008
Related drivers:View related drivers
Msi KT3 Ultra2 driver 5.7 details 
Before you Download
